19" Enclosure for 48 MPO high-density cassettes, 4U, black
Enclosures are designed for mounting high-density optical MPO cassettes in a 19" cabinet or rack. Cassettes are fixed in the body in special lodgments without the use of tools. Special inserts can be installed on unused places. MPO cable assemblies for connecting cassettes are put in from the back of the enclosure.
The enclosure body is made of steel, it has a unique design with sliding shelves which allows you to maximize the use of rack space. The installation depth of the enclosure on the mounting rails can be adjusted by changing the position of the side brackets.

Due to this design as well as the size of the MPO cassettes intended for this enclosure the port density is 576 LC connectors per 4U. The sliding mechanism of the cassette shelves provides convenient connection of the cable assembly from the back of the cassettes and a comfortable connection of LC patch cords from the front side of the enclosure.
There are rings with easy-to-open clips on the front of the shelves for patch cords management and maintaining the correct cable bend radius.
The front part of the enclosure has a folding protective panel that protects the connectors of fiber patch cords from mechanical damage.
Made of steel.
Color is black (RAL 9004).
Frequently Asked Questions
What is the LAN-FOBM-48MCC-4U panel used for?
The panel mounts high-density MPO optical cassettes in a 19-inch cabinet or rack — pull-out shelves give rear access to the cassettes for MPO cable assembly connections and front access for LC patch cord connections.
How are cassettes secured in the panel?
Cassettes snap into their mounting slots with latches, with no tools needed.
How many LC ports fit in the LAN-FOBM-48MCC-4U panel?
At full load, the panel is rated for 576 портов LC (48 кассет × 12 LC).
Are the optical connections protected from mechanical damage?
Yes, the panel's hinged front cover closes over the connected patch cords and protects the connections from accidental mechanical impact.
What goes in unused cassette slots?
The panel ships with LAN-MCC-XX blanking plates for covering empty cassette positions.
How do I know which MPO polarity type (Type A, B, or C) I need for the cassettes in this panel?
MPO polarity confusion is a common problem: the same physical "key up/key down" connector can require a different fiber mapping depending on whether the panel is used for a direct "back-to-back" connection between active equipment or for routing through LC patch cords that already perform the TX/RX crossover. Before ordering cassettes, confirm the polarity type with your transceiver supplier or check the cable assembly's fiber map, rather than judging it from the connector's appearance alone.
Package dimensions and weight
Single item
| Unit | length × width × height (mm) | Weight (kg) | Volume (m3) |
|---|---|---|---|
| pcs | 560 × 220 × 370 | 12 | 0.045584 |