TWT, 10-pair

TWT, 10-pair for copper structured cabling systems. LANMASTER product information, specifications and part number details.
TWT-LSA-DP10-WH

Used to temporarily break the circuit between all opposite contacts of disconnection module TWT-LSA10-DIS, TWT-LSA10P-DIS and TWT-LSA10P-DIS-Q.

Made of PVC.

Most frequently asked questions and answers

What is the disconnecting plug TWT-LSA-DP10-WH used for?

The disconnecting plug is used to temporarily break the contacts of a pair of a disconnectable block (single-pair or 10-pair version). Material: PVC.

TWT, 10-pair TWT-LSA-DP10-WH
Appearance TWT-LSA-DP10-WH
How do I install the disconnecting plug TWT-LSA-DP10-WH?

Insert the plug into the block: the pair is opened and the line or test equipment connected to the plug gets access to the contacts. To restore the connection remove the plug.

Which tool is used to terminate pairs on LSA blocks, to which TWT-LSA-DP10-WH belongs?

Cable pairs are terminated on LSA contacts (insulation displacement contacts) with a punch-down tool with a blade for LSA contacts: the conductors are laid into the contacts according to the colour code, and the tool presses them in and trims the excess at the same time. Do not terminate conductors with a screwdriver.

How do I label lines on LSA blocks when using TWT-LSA-DP10-WH?

To label lines use the hinged label frame installed over a 10-pair block or protection magazine and the numbered inserts. Write the line numbers in accordance with the design documentation and update them when re-patching.

Didn’t find an answer to your question?

Package dimensions and weight

Single item

Product code Unit length × width × height (mm) Weight (kg) Volume (m3)
TWT-LSA-DP10-WH box 160 × 20 × 120 0.053 0.000384

Product Codes (1)

Specifications are subject to change without notice. For the most current information, consult LANMASTER or an authorized LANMASTER partner/distributor.