120 mm fiber raceway downspout with cover, yellow
Purpose:
- Creates a vertical downspout from a 120 mm fiber raceway while maintaining the required bend radius.
Features:
- Fast installation.
- Removable cover for access to the downspout.
Package includes:
- Downspout - 1 pc.
- Downspout cover - 1 pc.
- Plastic screw and plastic nut - 2 pcs.
Typical application:
- Downspout from a straight fiber raceway section to a lower 120 mm raceway route.
Frequently Asked Questions
What is the LAN-OT120-OB drop for?
The drop provides a vertical cable exit from the route into a 120 mm tray, while keeping the required bend radius at the transition point.
What does the drop kit include?
The kit includes one drop element, one drop cover, and two plastic bolts with plastic clips for fastening.
Is an extra connector needed to install the drop?
Yes, one LAN-OT120-CN connector, purchased separately, is used to join the drop to the 120 mm straight tray section.
How does LAN-OT120-OB differ from LAN-OT120-OM and LAN-OT120-OS?
LAN-OT120-OB routes the cable vertically into a tray of the same width. LAN-OT120-OM and LAN-OT120-OS, by contrast, route the cable from the tray into a corrugated tube — LAN-OT120-OM is sized for a 56 mm tube, while LAN-OT120-OS fits a corrugated tube without being tied to one specific diameter.
Why does the bend radius matter at the drop point?
A sharp bend where the cable leaves the tray increases the risk of fiber damage and higher signal attenuation. Industry guidance for cable pathways sets the minimum smooth radius at such points at no less than 50 mm.
Package dimensions and weight
Single item
| Unit | length × width × height (mm) | Weight (kg) | Volume (m3) |
|---|---|---|---|
| pcs | 300 × 250 × 300 | 0.4 | 0.0225 |