Assembly pad for LANMASTER's field installable optical connector
The pad is designed for terminating LAN-FMC-SC field installable optical connectors.
The assembly pad has notches and grooves for proper placement of the connector retainer and fiber optic drop cable.
The pad has marks for indicating the correct fiber length before cleaving.
Field installable optical connectors allow fast termination of single-mode optical fibers used in FTTH networks.
Terminating the connector on the fiber is done without using a fusion splicer and does not require polishing the end of the ferrules.
Frequently Asked Questions
What is the LAN-FMC-GR assembly station used for?
The assembly station is designed for assembling LAN-FMC-SC field optical connectors — a fast, fusion-free mechanical splice of single-mode optical fibers used in FTTH networks.
Is a fusion splicer needed to assemble a connector on this station?
No, the station is built for fusion-free assembly: single-mode fibers are joined mechanically, without a fusion splicer and without polishing the ferrule end face.
What features of the station ensure accurate connector assembly?
The station has notches and grooves that position the connector's latch and the incoming optical fiber (pigtail) correctly, plus markings for setting the fiber to the right length before cleaving.
Which connectors is the LAN-FMC-GR station compatible with?
The station is designed for assembling LAN-FMC-SC/APC and LAN-FMC-SC/UPC field optical connectors.
Package dimensions and weight
Single item
| Unit | length × width × height (mm) | Weight (kg) | Volume (m3) |
|---|---|---|---|
| pcs | 60 × 5 × 15 | 0.02 | 0.000005 |