TWT, shielded, Category 5e, RJ45 plug, 100 pcs.
TWT, shielded, Category 5e, RJ45 plug, 100 pcs.. Product for LANMASTER copper structured cabling systems. Use in connectors applications according to the project design and product specifications.
Most frequently asked questions and answers
What is the TWT-PL45/S-8P8C/JR100 RJ-45 connector used for?
Shielded RJ-45 connectors are intended for making shielded patch cords. The blade design allows both solid and stranded (patch-cord) cable to be terminated. They comply with the requirements of category 5e and have 8 contacts with a thin layer of precious metals for better conductivity. The body has a metal shielding shell that is connected to the cable screen.
How do I crimp the TWT-PL45/S-8P8C/JR100 RJ-45 connector?
Strip the cable sheath, arrange the conductors according to the T568B or T568A scheme (the same at both ends of the cord), trim them evenly, insert them into the connector as far as they go and crimp with an RJ-45 crimping tool. The cable screen must be connected to the metal shell of the connector. Use TWT-BO-6.0-xx/100 protective boots for protection against kinks.
How is the TWT-PL45/S-8P8C/JR100 connector packaged?
The connectors are supplied in a jar of 100 pieces, which is convenient for storage and distribution on site.
Which cable category should I choose for the TWT-PL45/S-8P8C/JR100 connector?
The connector category must match the category of the cable and the other link components (the category is determined by the weakest component). Use shielded connectors only with shielded cable and shielded equipment.
How many connectors are in the TWT-PL45/S-8P8C/JR100 package?
The package contains 100 connectors, which is convenient for serial production of patch cords.