Visual Fault Locator
Visual fault locator is used to find damage and defects in optical fibers. To search for defects super-bright light in the visible spectrum (650nm - red light) is used.
When injecting visible light into the fiber being tested, the locations of defects and damages are marked with red light.
Blink mode ensures that the red light is visible even in bright ambient lighting conditions.
The tool is easy to use, solid and undemanding.
The device is equipped with a universal 2.5 mm socket.
Technical Specifications:
| Parameter | Value |
| Wavelength | 650±10nm |
| Output power, mW | 5 |
| Optical connector | universal 2.5 mm connector |
| Blink frequency, Hz | 2~3 |
| Operating temperature | -20°~+60° |
| Storage temperature | -40°~+85° |
| Battery type | Two AA batteries (not included) |
| Battery life | More than 20 hours |
| Length, mm | 190 |
| Diameter (at widest part), mm | 25 |
Package includes:
- Visual Fault Locator,
- Quick user guide,
- Zippered case.
Frequently Asked Questions
What is the LAN-FT-PVL visual fault locator used for?
What connector does the device use to attach to the fiber?
It connects via a FC/ST/SC (универсальный адаптер) connector.
What fiber length is the device rated for?
The laser output power is менее 10 мВт, allowing it to find faults on fiber lines up to several kilometers long, depending on the fiber type and quality.
Is the device's laser hazardous to the eyes?
Yes, the device uses Class 2 laser radiation, so you must never look directly into the fiber end face or the device's output port while it's operating.
Can the fault locator find a break through several connectors in a row?
The fault locator reliably reveals damage within a single cord and near the nearest connector or splice — cracked fiber, sharp bends, a bad splice. It is not designed to find a fault through several consecutive connectors, since visible light is noticeably attenuated at every joint.
Does the fault locator's light show through any cable jacket?
The light passes well through single-fiber cords with a yellow (singlemode) or orange (multimode) jacket. Black and gray jackets, as well as most multi-fiber cables, block the light, so visual tracing does not work through them.
Package dimensions and weight
Single item
| Unit | length × width × height (mm) | Weight (kg) | Volume (m3) |
|---|---|---|---|
| pcs | 230 × 40 × 40 | 0.18 | 0.000368 |