Replacement cleaning tape reel for cassette cleaner
The replacement reel is designed for the LAN-FT-CL/CAS cassette as a consumable. The lint-free cleaning tape can remove dust, oil, and other contaminants from the connector end face quickly and efficiently without additional wipes or cleaning fluids.
The kit includes a supply reel with cleaning tape and a takeup reel. One tape lasts over 500 cleaning cycles, after which it can be easily replaced with a new one.
Package includes:
- Supply reel - 1 pc.
- Takeup reel - 1 pc.
Frequently asked questions and answers
What is the LAN-FT-CL/CAS cassette designed for?
What is included in the package?
The package includes the cassette and a textile case.
Do I need to use alcohol for cleaning?
No. The cassette uses dry tape, so additional liquids and wipes are not required. Do not wet the tape.
Can I clean a connector installed in an adapter?
No. The cassette is designed for cleaning disconnected connectors. To clean connectors in an adapter, use a cleaner for 1.25 mm ferrules or a cleaner for 2.5 mm ferrules.
Is the cassette suitable for MPO connectors?
Yes. The cassette can clean the end face of a disconnected MPO connector. For cleaning MPO connectors in an adapter and for regular MPO work, the dedicated LAN-FT-CL/MPO cleaner is more convenient.
How should I use the cassette?
Open the shutter, press the connector end face against the tape without excessive force and move it across the tape once. Do not move the end face over a section that has already been used.
What is the metal shutter for?
The shutter protects the tape from dust when the cassette is not in use. This is especially important when working in attics and technical floors. Close the shutter immediately after cleaning.
How many cleaning cycles is the tape rated for?
One tape is rated for more than 500 cleaning cycles. If the tape becomes contaminated or damaged earlier, replace it instead of waiting until the nominal life is exhausted.
Which replacement tape fits the cassette?
How do I replace the tape in the cassette?
Replace the tape according to the cassette instructions. Follow the tape feed direction: the cassette will not work if the tape is loaded incorrectly.
Is the cassette suitable for APC and UPC polished connectors?
Yes. The tape cleans the end face by mechanical contact regardless of polish type — PC, UPC or APC — and does not change its geometry.
Should I inspect the end face after cleaning?
Yes. Inspect the end face with a microscope such as the LAN-FT-FFM. If contamination remains, repeat the cleaning on a clean section of tape.
Does the CAS-R refill fit older CAS cassettes?
The refill kit is designed for the current LAN-FT-CL/CAS cassette design. Before replacing, check reel compatibility with your specific cassette, especially if it was purchased a long time ago.
Package dimensions and weight
Single item
| Unit | length × width × height (mm) | Weight (kg) | Volume (m3) |
|---|---|---|---|
| box | 160 × 30 × 110 | 0.1 | 0.000528 |