TWT optical patch cord, PVC, duplex, ST/PC-LC/PC, MM 50/125, 2.0 m
The patch cord is a piece of optical cable 50/125 with optical LC connector at one end and ST at another end.
TWT patch cords are produced in a PVC (polyvinylchloride) jacket and with a standard polishing quality.
The patch cord is used for connection between various network devices or between a network device and a fiber optic cross or inside a fiber optic cross.
Installed connectors are numbered.
Each patch cord comes individually packaged.
Specifications
| Insertion loss | |
| Return loss | |
| Number of fibers (cord type) | 1, 2 fiber (simplex, duplex) |
| Fiber optic type | 50/125 (OM2) |
| Buffer coating | Polyvinylchloride (PVC) |
| Jacket | Polyvinylchloride (PVC) |
| Connector type | LC, 2LC (duplex), ST, 2ST (duplex) |
| Polish style | PC, UPC, APC |
| Buffer coating thickness | 3 mm |
Patch cords with a length of 1, 2, 3 and 5 meters are constantly in stock. Patch cords of other lengths are also available on request with any fiber type (OM1, OM2) as simplex or duplex structure with various polishing options (PC, UPC, APC).
Frequently Asked Questions
What is the TWT-2ST-2LC/OM2-2.0 patch cord used for?
This is a duplex TWT optical patch cord, 2.0 m long, with an ST (Straight Tip) connector at one end and an LC (Lucent Connector) at the other, on 50/125 µm (OM2) multimode fiber. It links a network device to an optical distribution frame, or two devices with different optical connector types, for example equipment with LC ports and a patch panel with ST adapters. The connectors are numbered, the jacket is made of polyvinyl chloride (PVC) and the buffer diameter is 3 mm.
What do “2ST-2LC” and “duplex” mean?
A duplex patch cord contains two fibers: one for transmit and one for receive. The designation 2ST-2LC means two ST (Straight Tip) connectors at one end and two LC (Lucent Connector) connectors at the other. The connectors are numbered to keep the same polarity at both ends of the link: the transmitter of one device connects to the receiver of the other.
Can the patch cord be used with single-mode equipment?
No. The patch cord uses 50/125 µm (OM2) multimode fiber and suits only multimode links and equipment. Single-mode modules and links require a patch cord on 9/125 µm single-mode fiber.
Which versions are available besides the 2.0 m length?
TWT patch cords of 1, 2, 3 and 5 m are kept in stock. Other lengths, OM1 or OM2 multimode fiber, simplex or duplex versions and different polish classes (PC, UPC, APC) are available to order.
How do I clean the connectors before connecting?
Inspect the connector end faces before each connection and clean them if dirty: use LAN-FT-CL/OK1 for LC (Lucent Connector) connectors (1.25 mm ferrule) and LAN-FT-CL/OK2 for ST (Straight Tip) connectors (2.5 mm ferrule). Keep unused connectors closed with protective caps.
How should I route and store the patch cord?
Do not kink or twist the patch cord and do not overtighten cable ties: loss increases at a small bend radius. Connect and disconnect it by the connector body, not by the cable. Store the patch cord in its individual packaging with protective caps on the connectors.