Network Installation toolkit
Network Installation toolkit is intended for installation, testing, or maintenance of structured cabling systems.
Frequently Asked Questions
What is the LAN-NT-TK/BSC designed for?
This is a basic kit for twisted-pair installation work: cutting and stripping cable, terminating conductors in IDC contacts, crimping RJ-12/RJ-45 connectors, and checking the wiring of a finished cord.
What is included?
The kit includes a LAN-TST-WRM-300 tester with one 9 V F22 battery, a crimper, stripper, IDC tool, a case made of fabric, and a blister pack with 15 RJ-45 connectors, 15 RJ-11 connectors and one RJ-45 coupler. The included connectors are a starter quantity and can be replenished separately.
Can I use the kit on patch panels and telecom outlets?
Yes. A separate tool in the kit is intended for IDC termination. Check the contact type on the panel or module and use the appropriate tool side or blade.
Which connectors does the crimper support?
The kit page lists RJ-12 and RJ-45. It does not promise compatibility with every connector design, cable category or conductor construction. Match the connector to the cable and the specific crimper.
What does the LAN-TST-WRM-300 check?
The tester helps check conductor connections and identify twisted-pair wiring faults, including opens, short circuits and crossed conductors. It is not a cable certifier for verifying a cabling link's category.
Why does the tester show an open or incorrect wire map?
Check that each conductor is fully inserted into the connector channel and reaches its contact, that both ends follow the same wiring scheme, and that no conductors were damaged while stripping the cable jacket. Also confirm that the connector is suitable for the cable. Retest after correcting the termination.
Is a separate battery required?
No. The listed kit includes one 9 V F22 battery. Check its charge and polarity against the tester instructions before use.
How does Basic differ from LAN-NT-TK/INST?
Basic is a more compact kit for core tasks, including a tester and a limited starter quantity of connectors. The current LAN-NT-TK/INST page lists a broader set of installation tools and a soldering iron. Compare the current product pages for exact contents.
What if the LAN-TST-WRM-300 tester will not turn on?
Check the polarity and condition of the 9V F22 battery and replace it if needed. If the tester still will not turn on with a fresh battery, contact an official LANMASTER partner for diagnostics.
Package dimensions and weight
Single item
| Unit | length × width × height (mm) | Weight (kg) | Volume (m3) |
|---|---|---|---|
| pcs | 290 × 180 × 60 | 0.89 | 0.003132 |
Package
| Unit | length × width × height (mm) | Weight (kg) | Volume (m3) |
|---|---|---|---|
| box | 570 × 400 × 260 | 16.4 | 0.05928 |