Tool kit for working with optical cables
The toolkit is intended for installing any type of optical cable.
The tools included in the kit allow you to cut and strip cables, strip optical fibers, prepare them for cleaving and subsequent termination. The kit also includes a tool for assembly/disassembly of optical distribution and splice enclosures.
For easy storage and carrying, the tools come in an aluminum case with a foam rubber organizer.
Includes keys for locking the case and a shoulder strap for carrying it.
Case dimensions, mm (DxWxH): 290x405x145
The kit includes 18 items:
- Universal optical stripper for fiber buffer CFS-2,
- Traverse stripper for cable jacket,
- Screwdriver with replaceable bits,
- Set of precision screwdrivers,
- Split wrench up to 23 mm,
- Utility knife,
- Cable cutter,
- Pliers,
- Side cutters,
- Narrow pliers,
- Alcohol dispenser (empty),
- Stripper for fiber coating,
- LED flashlight (without batteries),
- Tape measure, 3.5 m,
- Tweezers,
- Kevlar scissors,
- Double-sided marker (thin/thick),
- Rubber air blower for blowing air out.
Frequently asked questions and answers
What is LAN-NT-TK/FIBER designed for?
The kit is intended for optical cable installation work: preparing the cable, stripping optical fibers and preparing the fibers for subsequent termination. It also includes a tool for assembling and disassembling fiber-optic patch panels or closures.
Which tools are included?
The official product listing specifies 18 items: a CFS-2 universal fiber-optic stripper, a stripper for transverse slitting of the outer jacket of fiber-optic cable, a screwdriver with interchangeable bits, a watchmaker's screwdriver set, an adjustable wrench up to 23 mm, a utility knife, a cable cutter, pliers, side cutters, long-nose pliers, an empty alcohol dispenser, a fiber-jacket stripper, an LED flashlight without batteries, a 3.5 m tape measure, tweezers, Kevlar scissors, a double-ended marker and a rubber air bulb. Check the delivered contents against the current product listing.
How does LAN-NT-TK/FIBER differ from LAN-NT-TK/FIBER-2?
LAN-NT-TK/FIBER contains tools for cable preparation, while LAN-NT-TK/FIBER-2 additionally includes a cleaver, optical power meter, visual fault locator and connector-cleaning supplies. Do not assume that FIBER-2 items are included with FIBER.
Does FIBER include a cleaver, fusion splicer or optical power meter?
The listed equipment and tools are not included in this kit. LAN-NT-TK/FIBER helps prepare the cable and fiber for subsequent work, but this kit cannot cleave or fusion-splice the fiber or measure optical loss. Select compatible equipment separately or consider the LAN-NT-TK/FIBER-2 kit.
Which tool should I use for the cable jacket and fiber coating?
The kit includes a stripper for transverse slitting of the outer jacket of fiber-optic cable, a fiber-jacket stripper and a CFS-2 stripper for buffer coatings. Match the cable construction and dimensions to the tool's intended application and use the appropriate notch. Follow the CFS-2 manufacturer's instructions for that tool.
How do I use the CFS-2 without damaging the fiber?
Make sure the notch is clean and select the notch for the layer being removed. The CFS-2 instructions describe controlled, straight stripping motions; several short strokes may be used to reach the required length. Do not adjust the factory-set notches or pull with excessive force: debris in a notch can damage or break the fiber.
Is the kit suitable for every optical cable?
LANMASTER describes the kit as intended for installation of optical cable of any type. This does not mean every tool fits every cable construction and diameter. Before starting, check the specific cable's construction and dimensions against the stripper application and the cable manufacturer's documentation.
Are alcohol and flashlight batteries included?
No. The kit includes an empty alcohol dispenser and a flashlight supplied without batteries. Provide consumables and batteries separately, following the instructions for the relevant tools.
Does the kit include a cleaner for connector end faces?
No, a dedicated connector end-face cleaner is not included. The air bulb is not a substitute for ferrule cleaning. Select a tool for the ferrule size: LAN-FT-CL/OK1 for 1.25 mm or LAN-FT-CL/OK2 for 2.5 mm. Inspect end faces before mating.
How should I inspect a connector end face after cleaning?
Inspect the end face with a suitable microscope before connection. LAN-FT-FFM supports FC, SC, ST and LC connectors and includes adapters for 1.25 mm and 2.5 mm ferrules. If contamination remains or damage is visible, do not connect the end face until the cause is resolved.
Can I use the air bulb to blow dirt out of an optical port?
The kit includes an air bulb, but it does not replace end-face inspection and specialized cleaning. Inspect the end face, then use a cleaner intended for the connector and adapter type.
What precautions should I take when working with cut fiber?
Wear eye protection and keep the work area clean. Do not touch the prepared fiber end face, and collect fiber scraps safely rather than leaving them on the bench or in the case. Follow the CFS-2 safety instructions when using that tool.
How should I transport and store the kit?
The tools are supplied in an aluminum case with a fitted foam insert; a shoulder strap and case keys are also included. After work, remove scraps from the tools, return each item to its fitted location and close the case.
How do I care for the utility knife and cable cutter in the kit?
Clean the blades of jacket residue and grease after use. Store the tools in the closed case, keeping the blades away from contact with other metal parts. Replace a tool if its blade becomes dull or damaged.
Can I buy a replacement for a single lost tool from the kit?
Individual tools from the kit are not sold as standalone items in LANMASTER's retail lineup. If one tool is lost or damaged, check availability with an official LANMASTER partner.
Package dimensions and weight
Single item
| Unit | length × width × height (mm) | Weight (kg) | Volume (m3) |
|---|---|---|---|
| pcs | 400 × 310 × 140 | 5.5 | 0.01736 |
Package
| Unit | length × width × height (mm) | Weight (kg) | Volume (m3) |
|---|---|---|---|
| box | 420 × 320 × 300 | 11 | 0.04032 |