Coaxial cable crimp tool kit
The tool kit is intended for work with most coaxial cables and allows you to cut and strip of cables and crimping coaxial connectors of different diameters.
For easy storage and carrying, the tools are supplied in a plastic case with a compartments insert.
Kit includes:
- Coaxial connector crimping pliers with ratchet mechanism,
- Five sets of replaceable crimping dies,
- Cable cutting tool,
- Cable stripping tool,
- Magnetized Phillips screwdriver.
Frequently asked questions and answers
What is the LAN-NT-TK/COAX designed for?
The kit is designed for cutting and stripping coaxial cable and crimping coaxial connectors. The manufacturer describes it for most coaxial cables, but each cable-and-connector combination must be checked separately.
What is included in the kit?
Do the dies fit every coaxial connector?
No. Die selection depends on connector construction, cable dimensions and the required crimp profile. Check the connector and die markings against the manufacturer's documentation; do not choose a die by appearance alone.
Can I use it with different coaxial cable diameters?
The kit is specified for most coaxial cables and includes interchangeable dies for different connector sizes. This does not mean it fits every cable. Check the outer diameter, center-conductor construction, dielectric and shield against the selected connector requirements.
How does crimping differ from compression termination?
They are different connector attachment methods. The kit is described for crimping. Do not substitute it for a compression tool when the connector instructions require compression.
How should I prepare the cable end before crimping?
Use the stripper supplied in the kit and follow the cable strip length specified in the instructions for the specific connector. The cable end should be square, with the center conductor, dielectric and shield prepared without damage. One universal strip dimension cannot be applied to every connector.
What should I check if the connector is loose or the signal is unstable?
Confirm the connector matches the cable, the correct die was used and the connector body makes proper contact with the shield. Inspect the center conductor and dielectric. If uncertain, cut off the termination and redo it according to the connector manufacturer's instructions.
Is a tester for the finished line included?
This kit is intended for cable preparation and crimping. Use a separate instrument suitable for your line and equipment to test electrical performance.
How do I extend the life of the interchangeable crimping dies?
Use each die only with the connector type and size it is rated for. Store the dies in a dry place and avoid excessive crimping force, which can deform the working surfaces.
Do the dies fit RG-6 and RG-59 cable?
The five sets of interchangeable dies are rated for different connector sizes. Before installation, match the die and connector to the specific cable type — RG-6, RG-59 or other — by its outer diameter and construction.
Package dimensions and weight
Single item
| Unit | length × width × height (mm) | Weight (kg) | Volume (m3) |
|---|---|---|---|
| pcs | 270 × 50 × 230 | 1.445 | 0.003105 |
Package
| Unit | length × width × height (mm) | Weight (kg) | Volume (m3) |
|---|---|---|---|
| box | 670 × 250 × 310 | 17 | 0.051925 |