TWT, shielded, Category 6, RJ45 keystone jack, 90-degree, 45-degree, white

TWT, shielded, Category 6, RJ45 keystone jack, 90-degree, 45-degree, white for copper structured cabling systems. LANMASTER product information, specifications and part number details.
TWT-OK45STP/6-WH

TWT, shielded, Category 6, RJ45 keystone jack, 90-degree, 45-degree, white. Product for LANMASTER copper structured cabling systems. Use in twt rj45 keystone jacks applications according to the project design and product specifications.

Most frequently asked questions and answers

What is the TWT-OK45STP/6-WH Keystone module used for?

The Keystone module with an RJ-45 socket (8P8C, eight-contact connector) is used for equipping shielded telecommunication outlets installed in a box, on a wall or in a wall, as well as in modular patch panels (see the compatibility table). The module has the standard Keystone size and suits products of other manufacturers of this format. It complies with the requirements of category 6. Features: the IDC110 contact block is at 90° to the front surface.

TWT, shielded, Category 6, RJ45 keystone jack, 90-degree, 45-degree, white TWT-OK45STP/6-WH
Appearance TWT-OK45STP/6-WH
Which speed does the TWT-OK45STP/6-WH module support?

The module complies with category 6 and is intended for links for Gigabit Ethernet networks and, over a limited link length, 10GBASE-T. The link category is determined by its weakest component, so the cable, patch panels and cords must be of the same or a higher category.

How do I terminate a cable in the TWT-OK45STP/6-WH Keystone module?

Strip the cable sheath, arrange the conductors according to the diagram printed on the module (T568A or T568B; use one scheme along the whole link) and punch them down to the IDC (insulation displacement contact) contacts with a 110-type punch-down tool. The IDC contacts cut through the insulation, so the conductors need not be stripped. Fit the protective insert if it is included: it holds the conductors and protects them from being pulled out when the cable is tensioned. For a shielded module, connect the cable screen to the body: screen continuity is ensured by clamping the cover halves together and the connection is secured with the supplied tie.

How do I ground the TWT-OK45STP/6-WH shielded module?

The cable screen must be reliably connected to the module screen, and the module screen to a grounded patch panel or an outlet with a metal body. Use shielded cable and patch cords; a break in the screen at any point removes the link protection against interference. Grounding must be made at one point, without several paths with different potentials.

When should I choose the TWT-OK45STP/6-WH module with side-mounted IDC contacts?

A 90° angle between the IDC (insulation displacement contact) block and the front face is convenient where there is little space behind the outlet or panel: the cable comes from the side and is not bent at a sharp angle. With contacts at 180° the cable approaches perpendicular to the front face, so such a module needs more free depth.

Why are TWT-OK45STP/6-WH modules of different colours needed?

Colour marking of the whole panel or of individual elements allows ports to be identified visually, so multi-coloured Keystone modules are used to improve the administration of the SCS (structured cabling system). For example, telephone, computer and service lines are marked with different colours. Colours of this item: white.

Which patch panels and outlets is the TWT-OK45STP/6-WH module compatible with?

The module is installed in Keystone-format modular patch panels and outlets. The compatibility of specific panels is given in the compatibility table on the product page; the module width corresponds to the standard Keystone size.

What should I do if a link with the TWT-OK45STP/6-WH module is unstable?

Check that the conductors are terminated by the same scheme (T568A or T568B) at both ends of the link, that there is no open or short circuit and that the pairs are not untwisted beyond the length required for termination. Check the link with a tester, redo the termination if necessary and make sure the category of all components is not lower than required.

Didn’t find an answer to your question?

Package dimensions and weight

Single item

Unit length × width × height (mm) Weight (kg) Volume (m3)
pcs 45 × 20 × 25 0.024 0.000023

Package

Unit length × width × height (mm) Weight (kg) Volume (m3)
box 330 × 255 × 330 12.67 0.02777
box 230 × 250 × 80 1.21 0.0046

Product Codes (1)

  • TWT, shielded, Category 6, RJ45 keystone jack, 90-degree, 45-degree, white
Specifications are subject to change without notice. For the most current information, consult LANMASTER or an authorized LANMASTER partner/distributor.