Microscope for optical connectors inspection

Microscope for optical connectors inspection LAN-FT-FFM: specifications, description and use in structured cabling and LANMASTER infrastructure projects.
LAN-FT-FFM

Handheld microscope for inspecting optical connector end faces for dirt, dust, and scratches. Contamination or damage to an optical connector can significantly reduce the power of the transmitted signal and increase return loss, which in turn leads to a deterioration in the quality of data transmission and even reduces the service life of active equipment. The device uses LED backlighting. The backlight is turned on by pressing a button. Compatible with FC, SC, ST, LC optical connectors.

Package includes:

  • Microscope – 1 pc.,
  • Universal adapter for 1.25mm connector – 1 pc.,
  • Universal adapter for 2.5mm connector – 1 pc.,
  • User manual – 1 pc.,
  • Carrying case – 1 pc.,
  • AAA battery – 3 pcs.


Microscope Technical Specifications
Parameter
Value
Magnification ratio400x
Optical connectors2.5mm, 1.25mm
Power sourcethree AAA battery
Battery life40 hours
Weight, grams600
Dimensions, mm225x60x35

Frequently Asked Questions

What is the LAN-FT-FFM device used for?

This inspection microscope for optical connector end faces visually checks polish quality, cleanliness, and the absence of defects (scratches, chips, contamination) on the fiber end face before connecting it.

What magnification does the microscope provide?

The microscope provides 400x magnification, enough to reveal most polishing defects and contamination on the fiber end face.

Why is it important to inspect the fiber end face before connecting?

A contaminated or damaged fiber end face is one of the main causes of excess attenuation and fiber optic connection failures, so visual inspection before every connection reduces the risk of such faults.

What connector types can be inspected with the device?

The device comes with adapters for inspecting the main optical connector types (including FC, SC, ST, LC) when the matching adapter tips are used.

How often should the fiber end-face be inspected under the microscope?

Industry guidance (including updates to the TIA-568.3 standard) calls for an inspect, clean if needed, re-inspect, connect routine before every connection, not only when a link problem appears: fiber contamination remains one of the leading causes of exceeding the loss budget in optical links.

Didn’t find an answer to your question?

Package dimensions and weight

Single item

Unit length × width × height (mm) Weight (kg) Volume (m3)
pcs 255 × 110 × 65 0.735 0.001823

Product Codes (1)

  • Microscope for optical connectors inspection
Specifications are subject to change without notice. For the most current information, consult LANMASTER or an authorized LANMASTER partner/distributor.