TWT, U/UTP, Category 5e, RJ45 plug, unshielded, 100 pcs.
TWT, U/UTP, Category 5e, RJ45 plug, unshielded, 100 pcs.. Product for LANMASTER copper structured cabling systems. Use in connectors applications according to the project design and product specifications.
Most frequently asked questions and answers
What is the TWT-PL45-8P8C-V RJ-45 connector used for?
Unshielded RJ-45 connectors are intended for making unshielded patch cords. The blade design allows both solid and stranded (patch-cord) cable to be terminated. They comply with the requirements of category 5e and have 8 contacts with a thin layer of precious metals for better conductivity. The insert makes it easier to arrange the conductors and check their position: after laying the conductors and trimming the excess, the insert is pushed into the body as far as it goes, then the connector is crimped with pliers.
How do I crimp the TWT-PL45-8P8C-V RJ-45 connector?
Strip the cable sheath, arrange the conductors according to the T568B or T568A scheme (the same at both ends of the cord), trim them evenly, insert them into the connector as far as they go and crimp with an RJ-45 crimping tool. Use TWT-BO-6.0-xx/100 protective boots for protection against kinks.
Which cable category should I choose for the TWT-PL45-8P8C-V connector?
The connector category must match the category of the cable and the other link components (the category is determined by the weakest component). Use shielded connectors only with shielded cable and shielded equipment.
How many connectors are in the TWT-PL45-8P8C-V package?
The package contains 100 connectors, which is convenient for serial production of patch cords.
Package dimensions and weight
Single item
| Unit | length × width × height (mm) | Weight (kg) | Volume (m3) |
|---|---|---|---|
| pack | 150 × 30 × 120 | 0.151 | 0.00054 |