TWT, coaxial cable, white, 100 m
TWT, coaxial cable, white, 100 m. Product for LANMASTER copper structured cabling systems. Use in coaxial cables applications according to the project design and product specifications.
Most frequently asked questions and answers
What is the TWT-RG6U-CS48/1-WH coaxial cable used for?
What does CCS mean in the designation of the TWT-RG6U-CS48/1-WH cable?
CCS (copper-clad steel) means that the centre conductor is made of steel wire with a copper coating. It is stronger than a copper conductor, but has a higher DC resistance and higher losses at low frequencies. This is sufficient for TV signals on short and medium runs; if the cable also powers active devices (for example, amplifiers or converters), take the voltage drop on long runs into account.
How does the TWT-RG6U-CS48/1-WH cable differ from the RG11 cable and which should I choose?
The RG11 cable is thicker, has a larger centre conductor and lower attenuation over long runs, so it is chosen for backbone lines. The RG6 cable is thinner and more convenient for in-building distribution to subscribers. Choose RG6 for short branches and RG11 for long backbones; select F connectors for the specific cable type.
How do I terminate the TWT-RG6U-CS48/1-WH coaxial cable with an F connector?
Strip the sheath and carefully fold back the braid without damaging the foil and the dielectric, leave the centre conductor at the required length and fit an F connector designed for this cable type. Make sure the braid does not touch the centre conductor: a short degrades the signal. For outdoor connections protect the connector from moisture with a sealing boot.
How do I install and store the TWT-RG6U-CS48/1-WH cable?
Unwind the cable without loops or kinks, observe the minimum bend radius and do not tighten cable ties so that the sheath is crushed. Do not run the cable close to power lines. Store the cable in a dry room and protect the ends from moisture. The cable with a PVC (polyvinyl chloride) sheath is intended for installation inside buildings.
Package dimensions and weight
Single item
| Unit | length × width × height (mm) | Weight (kg) | Volume (m3) |
|---|---|---|---|
| coil | 280 × 100 × 280 | 3.5 | 0.00784 |
Package
| Unit | length × width × height (mm) | Weight (kg) | Volume (m3) |
|---|---|---|---|
| box | 550 × 290 × 280 | 21.8 | 0.04466 |