TWT, F/UTP, Category 6, twisted-pair cable, 4-pair, PVC, gray, 305 m

TWT, F/UTP, Category 6, twisted-pair cable, 4-pair, PVC, gray, 305 m for copper structured cabling systems. LANMASTER product information, specifications and part number details.
TWT-6FTP-GY

The cable comprises 4 pairs of stranded copper conductors.

Each conductor is covered with HDPE (high density polyethylene) insulation.

The cable fully complies with category 6 demands.

Two conductors are twisted with specially selected step in a single twisted pair.

Pairs in the cable are parted with a separator which increase cross attenuation between the pairs.

The cable comprises four twisted pairs and the separator with overall foil shield under a single PVC jacket.

There is a ripcord under the jacket to ease termination process.



Specification Value
Jacket Color Grey
Jacket Material PVC
Insulation Material HDPE (high density polyethylene)
Conductor Gauge, single 23 AWG
Conductor Type Solid
Cable Diameter 7.6 mm
Shield Material Aluminum polyester foil over 4 pairs
Operating Temperature -20 ºC to 75 ºC
Cable Length per Box 305 m
Nominal velocity propagation (NVP) 69%
Regulatory Certifications UL, ETL and 3P Verified
to ANSI/TIA/EIA568-D.2-1 Category 6
Regulatory Compliance

TIA/EIA568-D.2-1 Category 6,

ISO/IEC 11801-1:2017,

EN 50288-6-1:2013

Most frequently asked questions and answers

What is the TWT-6FTP-GY cable used for?

TWT-6FTP-GY is a screened (overall foil screen) category 6 cable made of 4 pairs of solid copper conductors. The cable is used for horizontal cabling of a structured cabling system (SCS): from the cross-connect equipment in the telecommunications room to the work-area outlets, and for connecting IP cameras, wireless access points and other network equipment. The conductor size is 23 AWG.

TWT, F/UTP, Category 6, twisted-pair cable, 4-pair, PVC, gray, 305 m TWT-6FTP-GY
Appearance TWT-6FTP-GY
What is the TWT-6FTP-GY cable made of and what are its features?

Each conductor is insulated with high-density polyethylene (HDPE); two conductors are twisted into a pair, and all pairs are enclosed in a common sheath. The cable has a PVC (polyvinyl chloride) sheath. The construction also includes: a ripcord for stripping the sheath.

Which network and link length does the TWT-6FTP-GY cable support?

Category 6 is rated up to 250 MHz and Gigabit Ethernet; 10GBASE-T is possible only over a limited link length (up to 55 m in the standards, provided the conditions are met). For links up to 100 m, the ISO/IEC 11801 and TIA-568 standards allow a permanent link of up to 90 m plus patch cords totalling up to 10 m. Do not exceed these values, otherwise the link may run at a reduced speed or with errors.

Which cable category should I choose: 5e, 6 or 6A?

Category 5e or 6 is enough for Gigabit Ethernet at work areas. Choose category 6A if 10 Gbit/s (10GBASE-T) is required over the whole link length, and category 6 if you need extra headroom in frequency performance. All components of the link (cable, outlets, patch panels, patch cords) must be of the same or a higher category: the link performance is determined by its weakest element.

How do I ground the screen of the TWT-6FTP-GY cable?

Connect the cable screen to ground through shielded outlets and a grounded patch panel; in the telecommunications cabinet bond the panel to the earthing bar. Use shielded components along the whole link: cable, modules, patch panels and patch cords. Do not leave the screen ungrounded and do not connect it to earthing points with a potential difference between them: current will flow through the screen and it will become a source of noise instead of protection. Follow the building grounding design.

Can the TWT-6FTP-GY cable be used for Power over Ethernet (PoE)?

The cable conductors are copper, so the link is suitable for Power over Ethernet (PoE). At PoE++ power levels, cables heat up in dense bundles, so in such cases choose a cable of a higher category with larger conductors and avoid very tight bundles.

How do I terminate the TWT-6FTP-GY cable in an outlet or patch panel?

Strip the outer sheath over the minimum length without damaging the conductor insulation. Untwist the pairs only as far as needed for termination and arrange the conductors according to the colour scheme on the module or panel (T568B or T568A, identical along the whole link). Punch the conductors down with a punch-down tool for 110 or Krone contacts and trim the excess. Connect the cable screen to the screen of the module or panel and ground it. Do not terminate with a screwdriver: it damages the contacts and the insulation.

Can a patch cord be made from the TWT-6FTP-GY cable?

For patch cords that are bent and switched frequently, use ready-made patch cords or a cable with stranded conductors. The solid conductors of this cable break when bent repeatedly. If you need a short piece for a one-off temporary link, use RJ-45 connectors designed for solid conductors and a crimping tool.

How do I install the TWT-6FTP-GY cable correctly?

Unwind the cable without loops or kinks and do not exceed the permitted pulling force. Observe the minimum bend radius and do not tighten cable ties so that the sheath is crushed. Do not run the cable close to and in parallel with power lines; cross them at an angle close to 90°. Leave a service loop at the outlet and in the cabinet.

How do I unwind the TWT-6FTP-GY cable from its package and how do I store it?

Pull the cable from the centre of the box without forming loops or figure-eights and hold the box in place. Store the cable in a dry room in its factory packaging and protect the cable ends from moisture and contamination.

Why does a link on the TWT-6FTP-GY cable run at 100 Mbit/s instead of 1 Gbit/s?

Typical causes are an excessive length, poor termination of the conductors, damage to a pair inside the cable (crushing, kink, impact), components of a lower category, or a wrong conductor order in the connector. Check the link with a tester: a simple continuity test does not reveal degraded parameters. Redo the termination at the problem end and replace the damaged cable section.

Didn’t find an answer to your question?

Package dimensions and weight

Single item

Unit length × width × height (mm) Weight (kg) Volume (m3)
reel 400 × 400 × 260 18.81 0.0416

Product Codes (1)

  • TWT, F/UTP, Category 6, twisted-pair cable, 4-pair, PVC, gray, 305 m
Specifications are subject to change without notice. For the most current information, consult LANMASTER or an authorized LANMASTER partner/distributor.