TWT, U/UTP, telephony cable, 25-pair, unshielded, gray
Multipair voice unshielded cable can be used for indoor voice cabling, to connecting PBX ports to cross, making multipair patch-cords.
Due to thin conductors (0.35 mm) and rare twists the cable is more flexible, has low weight and smaller diameter which is better suits for cabling in cramped conditions.
| Specification | Value |
| Jacket Color | Grey |
| Jacket Material | PVC (polyvinyl chloride) |
| Insulation Material | HDPE (high density polyethylene) |
| Conductor Type | Stranded |
| Conductor Gauge | 0.35 mm |
| Nominal Velocity Propagation (NVP) |
|
| Cable Diameter | 10.0 mm |
| Cable Length per Reel | 100 m |
| Operating Temperature | -20 ºC to 60 ºC |
Most frequently asked questions and answers
What is the TWT-TEL-UTP25 telephone cable used for?
The 25-pair unshielded multi-pair telephone cable is used for indoor telephone lines, for connecting automatic telephone exchange (PBX) ports to cross-connect equipment and for making multi-pair patch cords. The thin conductors (0.35 mm) and the looser pair twisting make the cable flexible and light, which is convenient when routing in confined spaces.
Can the TWT-TEL-UTP25 cable be used for an Ethernet network?
The cable is intended for telephony. For Ethernet networks use a four-pair cable of the appropriate category: the telephone cable has a looser pair twist, so its crosstalk performance is not designed for data transmission.
How do I identify the pair numbers in the 25-pair TWT-TEL-UTP25 cable?
Pairs are numbered according to the standard colour code: the primary colour defines a group of five pairs (white, red, black, yellow, violet) and the secondary colour defines the pair within the group (blue, orange, green, brown, slate). For example, pair 1 is white/blue, pair 6 is red/blue, pair 13 is black/green. Ring out and label the pairs before termination.
How do I terminate the TWT-TEL-UTP25 cable on a cross-connect or a telephone patch panel?
Strip the sheath to the required length, arrange the pairs by the colour code and punch them down to 110-type blocks or strips with a punch-down tool, keeping the twist up to the termination point. Fix the cable with a clamp or on a bracket so that its weight is not transferred to the contacts and label the blocks.
How do I install the TWT-TEL-UTP25 cable correctly?
Unwind the cable without loops or kinks and do not exceed the permitted pulling force and bend radius. Do not run the telephone cable close to and in parallel with power lines; cross them at an angle close to 90°.
Package dimensions and weight
Single item
| Unit | length × width × height (mm) | Weight (kg) | Volume (m3) |
|---|---|---|---|
| reel | 530 × 360 × 530 | 41.7 | 0.101124 |