TWT cable jacket striping tool
Designed for stripping and cutting twisted pair, coaxial and flat multi-conductor cables with a diameter of 3.5 to 9 mm.
The depth of cut is adjustable, allowing you to remove the jacket insulation without damaging the wires and shield.
Tool blades are replaceable.
Frequently asked questions and answers
What is TWT-STR-UTP designed for?
For stripping outer jackets and cutting twisted-pair, coaxial and flat multi-conductor cables.
What cable diameter does the tool support?
The manufacturer specifies a range of 3.5 to 9 mm. Check the cable size and construction before use.
Can it be used on coaxial cable?
Yes. Coaxial cable is among the supported types. Adjust the cut depth to avoid damaging the shield and inner layers.
Is the cut depth adjustable?
How should I set the cut depth?
Start with a shallow setting and try it on an offcut of the same cable. Increase the depth gradually: the blade should score the jacket without contacting internal components.
Should I readjust the tool when changing cable?
Yes. Recheck the setting when the diameter, jacket thickness or material changes. The same outside diameter does not guarantee the same stripping depth.
How much jacket should I remove?
Follow the stripping length specified for the plug, module or panel being terminated. Do not remove extra jacket simply to make handling easier.
Can it strip individual conductor insulation?
No, the tool is designed to strip the cable's outer jacket. For individual conductor insulation, use a tool rated for the conductor size and diameter.
What should I check after removing the jacket?
Inspect conductor insulation, shielding and other internal components for cuts. On twisted-pair cable, preserve pair twists except where termination requires untwisting.
What if the blade damages a conductor or shield?
Reduce the cut depth. Prepare an undamaged section for termination; do not conceal damage beneath the jacket or inside a connector.
Are the TWT-STR-UTP blades replaceable?
Yes. Select a compatible replacement blade and follow the tool instructions.
What if the jacket is difficult to remove?
Check the depth setting and blade condition on a sample offcut. Do not compensate for a blunt or damaged blade with excessive force.
What should I check after terminating the cable?
Test the connection using an appropriate cable tester. Visual inspection of the stripped cable does not replace testing the finished link.
How should I use and store the tool?
Inspect the body and blades before use. Remove jacket scraps after use, store the tool in a dry place and protect its cutting edges from damage.
Can the tool be used on armored cable?
The tool is rated for a 3.5–9 mm diameter range without metal armor. For armored cable, check whether its outer diameter fits this range, and note that the tool is not designed to cut through metal braid or tape armor.
Package dimensions and weight
Single item
| Unit | length × width × height (mm) | Weight (kg) | Volume (m3) |
|---|---|---|---|
| pcs | 180 × 20 × 90 | 0.063 | 0.000324 |