Hinged splice for a tray with 3.5-6.0 mm wire
Purpose:
- reinforcement of tray splices when forming external and internal bends.
Tray wire diameter:
- 3.5 mm – 6.0 mm.
Features:
- • strong splicing,
- • ease of installation,
- • suitable to all types of trays.
Kit includes:
- • hinged splice bar - 2 pcs.,
- • M6 x 20 bolt - 5 pcs.,
- • clamp washer - 4 pcs.,
- • M6 nut - 5 pcs.
Frequently Asked Questions
What is the LAN-MT-CA-EZ bend fixator used for?
The fixator reinforces the joint at a wire mesh tray bend — both an outside and an inside turn.
What tray wire diameter does the bend fixator fit?
The fixator fits wire mesh trays with a wire diameter from 3.5 to 6.0 mm and is designed for all tray types.
What does the bend fixator kit include?
The kit includes: lower plate — 2 pcs, upper plate — 4 pcs, M6x20 bolt — 5 pcs, M6 nut — 5 pcs.
Does the fixator's bolted joint keep the tray electrically continuous at the bend?
A bolted mechanical joint can only carry fault current reliably if there is solid metal-to-metal contact between the connected tray sections. If the project requires confirmed electrical continuity of the tray as a grounding conductor, don't rely on the mechanical connection alone — verify circuit continuity after installation and, where the project calls for it, add a separate bonding jumper between the connected sections.
Package dimensions and weight
Single item
| Unit | length × width × height (mm) | Weight (kg) | Volume (m3) |
|---|---|---|---|
| pcs | 200 × 20 × 80 | 0.22 | 0.00032 |
Package
| Unit | length × width × height (mm) | Weight (kg) | Volume (m3) |
|---|---|---|---|
| box | 300 × 120 × 220 | 23 | 0.00792 |