Grounding lug, M10, for trays with 3.5-5.0 mm wires

Grounding lug, M10, for trays with 3.5-5.0 mm wires LAN-MT-AE10: specifications, description and use in structured cabling and LANMASTER infrastructure projects.
LAN-MT-AE10

Purpose:

  • fastening the ground cable to a tray.

Tray wire diameter:  

  • 3.5 mm – 5.0 mm.

Features:

  • ease of installation,
  • suitable to all types of trays.

Quantity: 1 pc.

Frequently Asked Questions

What is the LAN-MT-AE10 grounding bolt used for?

The bolt attaches a grounding conductor to a wire mesh tray with a wire diameter from 3.5 to 5.0 mm.

What tray wire diameter does the grounding bolt fit?

The bolt fits wire mesh trays with a wire diameter from 3.5 to 5.0 mm and is designed for all tray types.

How many grounding bolts come in one order?

The bolt is supplied 1 piece per order.

What cross-section should the grounding conductor connected to the tray have?

The minimum cross-section of the protective or bonding conductor depends on the applicable regulations and the specific grounding scheme (main or supplementary equipotential bonding, and the type and cross-section of the cable run in the tray). Under GOST R 50571.5.54, the minimum cross-section of a conductor connected to the tray as a protective conductor is 2.5 mm² copper where mechanical protection is present and 4 mm² copper where it is not (16 mm² aluminum in both cases); for the main equipotential bonding system, the minimum copper conductor cross-section is 6 mm². Confirm the requirement against the project and the current edition of the applicable standards before installation.

Is it enough to ground just one section of a long tray run?

No, that is not enough. The tray must be electrically continuous along the whole route and bonded to the equipotential bonding system at the points the project specifies; a separate connection for every section is not required if the sections are securely fastened and have uninterrupted metal-to-metal contact between them — in that case, connecting the grounding conductor at the points the bonding design specifies is sufficient.

Didn’t find an answer to your question?

Package dimensions and weight

Single item

Unit length × width × height (mm) Weight (kg) Volume (m3)
pcs 25 × 20 × 20 0.028 0.00001

Package

Unit length × width × height (mm) Weight (kg) Volume (m3)
box 280 × 220 × 100 14 0.00616
box 240 × 170 × 100 6.77 0.00408

Product Codes (1)

  • Grounding lug, M10, for trays with 3.5-5.0 mm wires
Specifications are subject to change without notice. For the most current information, consult LANMASTER or an authorized LANMASTER partner/distributor.