Vertical PDU, 3 phase with MCB, A/V meter, 32A / 380V, 6xC19 + 24xC13, 2.0 m power cord, IEC 309 plug

Vertical PDU, 3 phase with MCB, A/V meter, 32A / 380V, 6xC19 + 24xC13, 2.0 m power cord, IEC 309 plug. Technical characteristics and inquiry information for the LANMASTER catalog.
TWT-PDVI3-6x24-CB-32

Three-phase power distribution unit is used for power delivery in telecommunication cabinets and racks. It solves the problems of insufficient length of equipment power cords, ease of access and maintenance.

The unit is equipped with an integrated power cable with three-phase IEC309 plug and a combined set of C19 and C13 sockets. Safety circuit breakers are provided. The unit with circuit breakers includes volt-ammeters to monitor the power supply parameters on each phase.

The PDU is 1.77 meters high and can be installed vertically in 19" cabinets and racks in available locations.


Specification
Value
Power source parameters
3P / 32A / 380V~ 50 Hz
Output sockets (OUT)

6 x IEC60320 C19

24 x IEC60320 C13

Input plug (IN) IEC60309
On-Off Switch Safety circuit breaker
Dimensions (WxHxD) 45x60x1772 mm

Frequently Asked Questions

What is the TWT-PDVI3-6x24-CB-32 vertical outlet strip used for?

It is a three-phase vertical outlet strip with mains-parameter readout for installation in 19-inch cabinets and racks, distributing power to equipment with C20 and C14 inlets.

How many outlets does the unit have and of what type?

6 outlets of type C19 and 24 outlets of type C13.

How is the unit switched on and off?

The unit has a built-in circuit breaker.

The breaker won't switch back on after it trips — what should I do?

After tripping, a circuit breaker can get stuck in a mid-trip position, partway between on and off — this happens not only from an overload but also from jolts during shipping. The unit can look faulty from the outside in this state. To restore it, first push the toggle fully into the off position, then switch it back on.

Can switching on all connected equipment at once trip the breaker?

Yes, switching on several devices at the same time — especially switches and other equipment with high inrush current — can briefly push the combined startup current above the breaker's rating and trip it, even though the running load is normal. It's best to power on connected equipment one device at a time, with a short interval between each, rather than all at once.

What does the readout on the unit show?

The unit has voltage and current meters that display readings for each phase separately.

What input connector and power cord does the unit have?

The input plug is a three-phase IEC309, with a built-in 2.0 m power cord.

What current and voltage is the unit rated for?

Three-phase, 32 A, 380 V, 50 Hz.

How is the unit mounted in the cabinet?

The unit is installed vertically in 19-inch cabinets and racks..

Didn’t find an answer to your question?

Package dimensions and weight

Single item

Unit length × width × height (mm) Weight (kg) Volume (m3)
pcs 2000 × 160 × 90 5 0.0288

Package

Unit length × width × height (mm) Weight (kg) Volume (m3)
pcs 1900 × 150 × 70 5.1 0.01995
pcs 1900 × 150 × 70 5.2 0.01995

Product Codes (1)

  • Vertical PDU, 3 phase with MCB, A/V meter, 32A / 380V, 6xC19 + 24xC13, 2.0 m power cord, IEC 309 plug
Specifications are subject to change without notice. For the most current information, consult LANMASTER or an authorized LANMASTER partner/distributor.