TWT, F/UTP, Category 6, twisted-pair cable, 4-pair, flame-retardant, halogen-free, violet, 305 m

TWT, F/UTP, Category 6, twisted-pair cable, 4-pair, flame-retardant, halogen-free, violet, 305 m for copper structured cabling systems. LANMASTER product information, specifications and part number details.
TWT-6FTP-NGLS

The cable consists of 4 pairs of single copper conductors.

The diameter of the conductor is 23AWG.

Each conductor protected with HDPE (high density polyethylene) insulation.

Two conductors stranded with a specially selected step make up one twisted pair.

4 twisted pairs wrapped in polyethylene film and together with a solid copper grounding conductor are enclosed in a common foil screen and NGLS jacket.

SpecificationValue
Jacket ColorPurple
Jacket Materialng(A)-LS
Insulation MaterialHDPE (high density polyethylene)
Conductor TypeSolid
Conductor Gauge23 AWG
Cable Diameter7.8 ±0.3 mm
Nominal velocity propagation (NVP)67 % at 100 MHz
Cable Length per Box305 m
Operating Temperature-20 ºC to +75 ºC
Regulatory Certifications

ETL VERIFIED

Regulatory Compliance

TIA/EIA 568-D.2 cat. 5e,

ISO/IEC 11801-1:2017,

EN 50173

Most frequently asked questions and answers

What is the TWT-6FTP-NGLS cable used for?

TWT-6FTP-NGLS is a screened (overall foil screen) category 6 cable made of 4 pairs of solid copper conductors. The cable is used for horizontal cabling of a structured cabling system (SCS): from the cross-connect equipment in the telecommunications room to the work-area outlets, and for connecting IP cameras, wireless access points and other network equipment. The conductor size is 23 AWG.

TWT, F/UTP, Category 6, twisted-pair cable, 4-pair, flame-retardant, halogen-free, violet, 305 m TWT-6FTP-NGLS
Appearance TWT-6FTP-NGLS
What is the TWT-6FTP-NGLS cable made of and what are its features?

Each conductor is insulated with high-density polyethylene (HDPE); two conductors are twisted into a pair, and all pairs are enclosed in a common sheath. The cable has a sheath that does not propagate flame in bundled installations and emits low smoke (ng(A)-LS). The construction also includes: a ripcord for stripping the sheath.

Which network and link length does the TWT-6FTP-NGLS cable support?

Category 6 is rated up to 250 MHz and Gigabit Ethernet; 10GBASE-T is possible only over a limited link length (up to 55 m in the standards, provided the conditions are met). For links up to 100 m, the ISO/IEC 11801 and TIA-568 standards allow a permanent link of up to 90 m plus patch cords totalling up to 10 m. Do not exceed these values, otherwise the link may run at a reduced speed or with errors.

Which cable category should I choose: 5e, 6 or 6A?

Category 5e or 6 is enough for Gigabit Ethernet at work areas. Choose category 6A if 10 Gbit/s (10GBASE-T) is required over the whole link length, and category 6 if you need extra headroom in frequency performance. All components of the link (cable, outlets, patch panels, patch cords) must be of the same or a higher category: the link performance is determined by its weakest element.

How do I ground the screen of the TWT-6FTP-NGLS cable?

Connect the cable screen to ground through shielded outlets and a grounded patch panel; in the telecommunications cabinet bond the panel to the earthing bar. Use shielded components along the whole link: cable, modules, patch panels and patch cords. Do not leave the screen ungrounded and do not connect it to earthing points with a potential difference between them: current will flow through the screen and it will become a source of noise instead of protection. Follow the building grounding design.

When do I need a cable with a low-smoke zero-halogen (LSZH) sheath?

An LSZH (low smoke zero halogen) sheath emits little smoke and no halogens when burning, so such a cable is chosen for premises with many people, cable ducts, escape routes, data centres and other places where the design or fire-safety regulations require it. The ng(A) marking in the name means that the cable does not propagate flame in bundled installations. If the design has no such requirements, a PVC-sheathed cable can be used.

Can the TWT-6FTP-NGLS cable be used for Power over Ethernet (PoE)?

The cable conductors are copper, so the link is suitable for Power over Ethernet (PoE). At PoE++ power levels, cables heat up in dense bundles, so in such cases choose a cable of a higher category with larger conductors and avoid very tight bundles.

How do I terminate the TWT-6FTP-NGLS cable in an outlet or patch panel?

Strip the outer sheath over the minimum length without damaging the conductor insulation. Untwist the pairs only as far as needed for termination and arrange the conductors according to the colour scheme on the module or panel (T568B or T568A, identical along the whole link). Punch the conductors down with a punch-down tool for 110 or Krone contacts and trim the excess. Connect the cable screen to the screen of the module or panel and ground it. Do not terminate with a screwdriver: it damages the contacts and the insulation.

Can a patch cord be made from the TWT-6FTP-NGLS cable?

For patch cords that are bent and switched frequently, use ready-made patch cords or a cable with stranded conductors. The solid conductors of this cable break when bent repeatedly. If you need a short piece for a one-off temporary link, use RJ-45 connectors designed for solid conductors and a crimping tool.

How do I install the TWT-6FTP-NGLS cable correctly?

Unwind the cable without loops or kinks and do not exceed the permitted pulling force. Observe the minimum bend radius and do not tighten cable ties so that the sheath is crushed. Do not run the cable close to and in parallel with power lines; cross them at an angle close to 90°. Leave a service loop at the outlet and in the cabinet.

How do I unwind the TWT-6FTP-NGLS cable from its package and how do I store it?

Pull the cable from the centre of the box without forming loops or figure-eights and hold the box in place. Store the cable in a dry room in its factory packaging and protect the cable ends from moisture and contamination.

Why does a link on the TWT-6FTP-NGLS cable run at 100 Mbit/s instead of 1 Gbit/s?

Typical causes are an excessive length, poor termination of the conductors, damage to a pair inside the cable (crushing, kink, impact), components of a lower category, or a wrong conductor order in the connector. Check the link with a tester: a simple continuity test does not reveal degraded parameters. Redo the termination at the problem end and replace the damaged cable section.

Didn’t find an answer to your question?

Package dimensions and weight

Single item

Unit length × width × height (mm) Weight (kg) Volume (m3)
pcs 345 × 345 × 320 20 0.038088

Product Codes (1)

  • TWT, F/UTP, Category 6, twisted-pair cable, 4-pair, flame-retardant, halogen-free, violet, 305 m
Specifications are subject to change without notice. For the most current information, consult LANMASTER or an authorized LANMASTER partner/distributor.