Crimping tool for EZ, 6P, 8P plugs with a ratchet mechanism
Crimping tool for RJ-45 and RJ-12 EZ type plugs (8P8C, 6P6C, 6P4C, 6P2C). The tool is compact and rugged, has a ratchet mechanism, and is lightweight.
The design includes blades for cutting and stripping cables. The metal part of the handle is marked with a wire map according to the T568A and T568B diagrams for convenience.
The tool is used to crimp EZ plugs with a through hole. The distinctive feature of these connectors and the tool used is that there is no need to align the wires before crimping the plug, they do not rest on the front of the plug but pass through. Thanks to the integrated cutter, excess wire length is automatically cut off when the crimping mechanism is actuated.
Frequently Asked Questions
What is the LAN-CRI-468R/EZ tool used for?
The tool is designed for crimping pass-through (EZ) connectors, as well as regular 6P and 8P connectors, when making patch cords and cables for RJ-45 and RJ-12 jacks.
What's special about EZ pass-through connectors, and why does this tool matter for them?
EZ connectors have an open front end, so the conductors don't need to be trimmed to length before crimping — they pass straight through. A built-in guillotine on the tool automatically trims the excess conductor length at the moment of crimping, which simplifies and speeds up cable assembly compared with regular connectors, where conductor length must be evened out beforehand.
What connector types does the tool work with?
The tool crimps RJ-45 and RJ-12 connectors: formats 8P8C, 6P6C, 6P4C, and 6P2C.
Does the tool have a ratchet mechanism?
Yes, the ratchet mechanism ensures a complete crimp cycle and won't let the jaws open until the crimp finishes — this prevents an under-crimped connection from releasing the handles too early.
Is a separate cable stripping tool needed?
No, the tool has built-in blades for trimming and stripping cable; a separate stripper is not required.
How do I avoid mixing up the conductor order when terminating a cable?
The metal part of the tool's handle has a wire-order diagram for the T568A and T568B standards.
Package dimensions and weight
Single item
| Unit | length × width × height (mm) | Weight (kg) | Volume (m3) |
|---|---|---|---|
| pcs | 310 × 30 × 120 | 0.5 | 0.001116 |