LANMASTER, Category 6, RJ45 patch cord
Patch cords are designed for manual connection of various SCS cable links to each other.
They are made from a four pair cable with stranded conductors at both ends of which four pair 110 type plugs are installed.
Patch cords provide high connection reliability and allow, if necessary, to quickly re-connect links.
The package includes a two-sided colored icon with a picture of a computer and a phone.
Category 6 compliant.
Patch cords are available in various lengths:
- 1 m
- 1,5 m
- 2 m
Most frequently asked questions and answers
What is the LAN-P4-P4-XX/6 patch cord used for?
The patch cord is intended for manual switching of different SCS (structured cabling system) cable segments to each other: plugs for a 110 cross-connect (S110) are installed at one or both ends and an RJ-45 or RJ-11 plug at the other. It is made of stranded cable, provides a reliable connection and allows quick re-patching. It complies with the requirements of category 6.
How do I connect the LAN-P4-P4-XX/6 patch cord to a 110 cross-connect?
Insert the S110 plug into the connecting block of the 110 cross-connect, orienting it by the arrow on the top side and the safety lugs: the lugs prevent wrong connection. Relieve the load on the plug by securing the cord in a cable organizer.
What should I do if the patch cord LAN-P4-P4-XX/6 does not work or works unstably?
Check that the conductors are connected by the same scheme at both ends of the link, that there is no open or short circuit and that all connectors are intact and fully latched. Check the link with a tester and make sure the category of all components is not lower than required.
Package dimensions and weight
Single item
| Product code | Unit | length × width × height (mm) | Weight (kg) | Volume (m3) |
|---|---|---|---|---|
| LAN-P4-P4-1.0/6 | pack | 250 × 50 × 250 | 0.57 | 0.003125 |
| LAN-P4-P4-1.5/6 | pack | 250 × 50 × 250 | 0.76 | 0.003125 |
| LAN-P4-P4-2.0/6 | pack | 250 × 50 × 250 | 0.94 | 0.003125 |