Business Advanced series 19" floor cabinet, 800 mm wide

The Business Advanced series floor cabinet is intended for 19" equipment mounted on two or four mounting rails. It is possible to install two post mount shelves and heavy-duty shelves having four mount post with mounting on front and rear rails (load capacity of each shelf is from 50 to 100 kg). Provision is made for installation of ceiling fan modules.

The cabinet design is based on a dismountable load-bearing frame.

The cabinet is supplied without doors, it is possible to complete it with various options for front and rear doors.

The door kits:

Any door can be used as a front or rear door, doors can be mounted to open both on the right or on the left side.

Removable side panels with plastic latches are used to provide convenient access to the equipment. The panels equipped with locks.

There are openings closed with removable covers for the entry of cables in the bottom and roof of the cabinet. It is possible to install cable brush entries instead of covers.

Also, additional holes are located on the sides of the roof. If necessary, they can be used as cable glands after removing the covers.

The dust filter TWT-CBB-BDF-xx can be installed in the bottom of the cabinet. The filter is a good protection of the cabinet internals from the penetration of dust and moisture from under the floor, while maintaining the possibility of cable entry through the filter. The filters install in the central hole of the cabinet's bottom.

800mm wide cabinets have two vertical cable managers as standard. The dimensions of the vertical manager for TWT Business series 800 mm cabinets are 93 mm wide, 71 mm deep. Such dimensions allow you to lay a sufficiently large number of patch cords and cables (from 110 to 150, depending on the diameter of the cables). Vertical managers can be installed on both sides, both in the front and in the back of the cabinet. Thus, up to 4 vertical cable managers (two of which are already included in the cabinet kit) can be installed in Business Advanced 800 mm cabinets, which allows you to significantly increase the number of cables laid in a vertical channel.

The cabinet is equipped with leveling feet to compensate uneven floors and swivel casters to allow movement. It is possible to install the cabinet on an additional plinth. In this case, the feet of the cabinet are transferred to the plinth. The feet are mounted in M12 threaded holes in the plinth.

It is possible to bay cabinets to each other using a baying kit for connecting cabinets.

The cabinet is supplied unassembled.

19” rails (extruders) are marked with rack mounting units (RMU).

Color is black (RAL 9004).

Maximal load capacity is 800 kg.

Ingress protection is IP 20.

Powder coating painting.

Scope of delivery: two frames packed separately, a box with a bottom and a roof, a box with side panels.  And a box with vertical cable managers.

Cabinets comply with ANSI/EIA RS-310-D, IEC297-2, DIN41494-1, DIN41494-7 international standards.