Keystone module, RJ45, category 6, STP, 90 degrees

Keystone module, RJ45, category 6, STP, 90 degrees

Product Code: LAN-OK45S6A/90

Keystone module, RJ45, category 6, STP, 90 degrees
Model range

The module can be used to complete shielded telecommunication sockets installed in wall trunks, in a wall box, also for installation in modular patch panels (see the compatibility items).

Category 6A compliant.

The module has a standard Keystone form-factor and can be used not only in LANMASTER and TWT socket adapters, but also in socket adapters from other manufacturers.

There is a shielded eight-pin RJ-45 socket on the front side of the module, and there is a block for eight contacts of the IDC110 type on the back side, located at an angle of 90˚ to the front surface of the module.
The continuity of the screen is ensured by a cable clip (in the form of a metal clasp). There is an anchor on the module case for fastening cable jacket with a tie included in the kit.

The insulation displacement contact method is used (IDC) to terminate incoming cable.

There is a wiring diagram for the cable conductors between the IDC pins in accordance with the T568A and T568B wire map for ease of installation.

Product descriptions are listed according to the available information at the time of publication. Product specifications can be changed without advanced notification. More detailed and exact information can be obtained from the official partners and distributors of LANMASTER.

Model range (1)

Code Name
LAN-OK45S6A/90 Keystone module, RJ45, category 6, STP, 90 degrees Add to list