LANMASTER FTP cat. 6 patch-cord
Patch cords is category 6 and fully comply with ISO/IEC 11801 standards. Patch-cords are made from shielded stranded cable with a separator and shielded Category 6 RJ-45 modular plugs. The junction between the RJ-45 plug and the cable is filled with a plastic to ensure a strong connection between them, such a connection is called molded. Special side ribs are provided at the molded part of the plug to protect the locking latch of the RJ-45 connector from damage and breakage. This solution does not interfere with pressing the latch. The plug has flexible strain relief boot, which provides a given cable bending radius during operation. Each patch cord undergoes mandatory testing for the integrity of electrical circuits, the absence of a short circuit and the correct wiring. Continuous shield provides reliable protection of the patch cord from electromagnetic interference. Out of production, replaced by: LAN-PC45/S6-XX-XX. |