The cable consists of 4 pairs of single copper conductors. The diameter of the conductor is 23AWG. Each conductor is protected with HDPE (high density polyethylene) insulation.
Two conductors stranded with a specially selected step make up one twisted pair. The pairs are separated from each other by a cross-shaped separator increasing the transient attenuation between the pairs. 4 twisted pairs and a separator are put in a common LSZH (low smoke, zero halogen) jacket.
There is a rip cord under the jacket to facilitate cable partition.
The cable meets the requirements of standards:
UL, ETL and 3P Verified to ANSI/TIA/EIA568-B.2-1 Category 6
ISO/IEC 11801
UL/CSA Listed CMR
NEMA WC 66
prEN 50288-6-1
Characteristic of the cable:
Characteristic
Value
Type of conductor
Solid
Conductor Diameter
23 AWG
Insulation Type
HDPE (High Density Polyethylene)
Outer jacket
LSZH
Jacket color
Orange
Cable diameter
6.0 mm
Impedance
100 ± 15 Ohm
Mutual Capacitance
17.1 nF / 1000 Ft
DC Resistance
28.6 Ohm / 1000 Ft
DC Resistance Unbalance of a pair
5%
Capacitance Unbalance pair to Ground
330 pF / 100 m
Propagation Delay Skew
45 nS / 100 m
Nomal velocity propagation
69% at 100 MHz
Attenuation to crosstalk ratio
at 100 MHz std. 28.5 dB at 150 MHz std. 20.4 dB at 300 MHz std. 4.8 dB
Product descriptions are listed according to the available information at the time of publication. Product specifications can be changed without advanced notification. More detailed and exact information can be obtained from the official partners and distributors of LANMASTER.
Model range (4)
Code
Name
LAN-6EUTP-LSZH-BK
LANMASTER UTP cable, 4 pairs, cat. 6, with partition, 550Mhz, LSZH, black, 305 m